Category Archives: Metal Oxide Varistor (MOV)
Posted by DACI1
(DMX files are available free to Design Master™ Professional Edition users who purchased or upgraded DM not more than one year prior to the DMX file release date.)
The MOV analysis determines whether a Metal Oxide Varistor transient voltage suppressor will (a) survive a specified surge voltage or current, (b) clamp the surge below a specified voltage limit, (c) not clamp the normal operating voltage, and (d) survive a specified number of surges. MOVS are typically rated with 8x20us current waveforms, and (just to be confusing) 10x1000us energy waveforms. MOVs also have a lifetime (number of allowable surges) that depends on peak current, pulse width, and temperature. To complicate things further, MOV clamping voltages are a nonlinear function of surge current. To help make the design engineer’s job a little easier, this analysis contains adjustment formulas for all of these factors. Also provides standard surge waveform requirements and helpful hints.
DMeXpert™ (DMX) files guide the user with pop-up instructions, component selection lists, standard part values, important formulas, and a variety of other tips that are activated when entering a Formula cell. It’s like having a design/analysis expert at your side.